NorthLawn

Free DIY turf planning tool

Build a preliminary turf material list.

Estimate the main quantities behind a homeowner installation. Use the actual roll layout and current product instructions before ordering.

DIY artificial turf takeoff

Project area and turf

Start with the net measured area. Turf allowance is a planning shortcut only; roll width, grain and seams control the actual purchase.

Excavation and aggregate base

Enter compacted base depth, not the loose delivery depth. Density varies by material and moisture.

Infill, fasteners and seams

Use the application rates and materials approved for the selected turf. Generic defaults are not product specifications.

Turf planning area440 ft²
Excavation volume4.94 yd³
Base order5.43 yd³
Approximate base weight8.4 t
Infill600 lb
Infill bags12 bags
Perimeter fasteners120
Seam tape1 roll
Project statusConfirm roll layout

Excavation is in-place volume and does not include soil swell. Base quantity includes the selected ordering allowance. Fasteners estimate the perimeter only. Seams may need additional fastening and adhesive. Do not use the estimate for playground fall-safety, rooftop or structural applications.

Turn the estimate into an order

  1. Use the roll-layout calculator to replace the turf allowance with actual roll cuts.
  2. Confirm the compacted base depth and aggregate with the site conditions and selected system.
  3. Check current manufacturer coverage for infill, seam materials, adhesive and fasteners.
  4. Verify delivery access, equipment, disposal and any municipal requirements.

Calculator reviewed September 9, 2026. This is a planning estimate, not a product specification or construction design.